FeaturesGFT144

  • Four independent delay channels
  • Programmable delay in 0.5 ps increments
  • 7 ns delay range
  • <3 ps input to output RMS jitter
  • Up to 50 MHz channel rate
  • LVPECL / CML / LVDS channel input
  • LVPECL channel output with MUX mode
  • Delay control via SPI link
  • Operate from DC +5 V
  • Compact module: 40 x 25 mm
  • Option: Evaluation board with TTL outputs and USB control

- Datasheet

 

FeaturesGFT632 photo

  • Output pulse    
    • 32 V amplitude under 50
    • <3 ns rise time    
    • <2 ps RMS jitter
    •  1 µs width
  • External trigger input
  • Operate from standard AC (90 to 240V) to DC (+12 V) adapter furnished
  • Output options:
    • Amplitude 15 to 70V
    • Width 50 ns to 1 µs

- Datasheet

 Features

  • GFT614 photo2Up to 250 MHz clock rate
  • Drive 100 feet of cable at 200 MHz   
  • Four (4) synchronized 50 Ω TTL outputs
  • 1 ns typical output rise & fall time
  • 1 ps input to output RMS jitter
  • TTL level 50 Ω or 1 KΩ input
  • Active low Gate input
  • Operate from DC +5 V (External AC to DC adapter is furnished)
  • Compact module: 103 x 80 x 30 mm
  • Option: Mounting flange

- Datasheet

VWA 0000367 photo

Features

  • 2 stages pHEMT GaAs amplifier
  • Gain control stage: (VcL)
  • Fast Rise time / Fall time : 100 ps
  • High output Voltage : 4 Vpp
  • High Gain Voltage : 20 dB
  • Power supply : 11 V / 300 mA
  • Size: 49.5 X 46.6 X 11.5 mm

- Datasheet

GFT400 photoFeatures

  • Gaussian output pulse
    • 500 ps (FWHM) width
    • < 5 ps RMS jitter
    • 2 V amplitude under 50 Ω
  • External trigger input
  • Operates from standard 12 AC/DC adapter furnished
  • Option: Ouput width from 400 ps to 1000 ps

- Datasheet

GFT300 photoFeatures

  • Input:
    • Amplitude: 100 mV to 1 V
    • Width > 500 ps
    • Repetitive rate: 80 MHz (40 to 100 MHz in option)
  • Two outputs:
    • Form: Sinus
    • Amplitude > 1 V typical
    • Impedance: 50 Ohms
  • Operates from 12 V AC/DC Adaptater

- Datasheet

GFT500

Features

  • Output Step Pulse
    • < 200 ps (20% to 80%) rise time
    • < 2 ps RMS jitter
    • 5 V amplitude under 50Ω
    • 100 ns width
  • External trigger input: 1.5 V threshold
  • Oprerates from 12 V AC/DC adapter

- Datasheet

GFT200 photo

Features

  • Input
    • 1310 to 1550 nm wavelengh
    • 20 µW optical threshold
    • SC/PC connecteur
  • Pulse output
    • 10 V under 50 Ω amplitude
    • 30 ps rms jitter
    • BNC connecteur
  • Compact module

- Datasheet

GFT101 photo

Features

  • 2.5 to 10 V input pulse
  • 1 ns output Rise time
  • 1310 nm ouput wavelengh
  • 30 ps rms jitter
  • Directly connectable to device ouput

- Datasheet